东莞市润源水处理设备有限公司(销售部)
主营产品:
2023年11月08日 13:10
很高兴为您推荐这款多路阀使用东莞润源水处理设备有限公司长期提供的一款价格低廉,性能质量好,适用于高硬水地区的软化阀,
该阀采用世界首创将流量和时间(模式)在一机上体现出来,达到时间流量双控模式,在线一键切换,在流量模式下,所有工位均按设定水量递减到”零“自动切换。。进水压力低,具有超强记忆功能,停电数月 数据不会归零,不需要重新设置,
该阀为全中文中文显示屏幕分两种LED显示和液晶显示,
详细介绍和参数请看下列:
近年来由于水处理行业的发展过快,人们对水处理产品的超求也越来越高,不管是外观还是性能都有极高的要求 ,普通市场上的软化阀有很多不足的地方,
普通市场上软化阀容易出现的问题如下:
常见问题:1:实际水量和说明水量到不到。
2:操作是由符号代替,操作不简便,客户无法自己操作。
3:停电记忆功能差,只有两三天,数据归零后需从新设置,(给较远的客户带来很多的不变)。
4:吸盐是时间来计量的,容易出现两种情况,一:压力过大、吸盐多盐浪费,二:压力小 吸盐量不够再生效果达不到。
5:因为是固床软化,所以罐体的装填量是70%,(罐子增大、增加成本)软化效果也不是很好。
6:还需要装流量计,阀内部没有计流量装置。(增加成本)。
7:外置电源,易损坏。
8:在多台一起使用是,没有互锁功能,不支持微控,输出容易对阀体本身和其他阀造成损坏,
9:性能差、价格高、质量不好,售后服务不完善。
In recent years,due to the development of the water treatment industry too fast,people have more serious demand and requirements in water treatment products both the appearance and performance are.But nowadays, the softening valves in market are generally have shortcomings which are as follows:
1.The actual water quantity and the described water quantity are not identical.
2. The operation are showed by the symbols,and is not very simple.The operation. are not easily to be get hang of.
3.The memory function after exiting power are not in good condition, just only two or three days.It needs to set again if you zero clean, which brings a lot of inconvenience to customers.
4.Absorbing brine is measured by time , whch will easily bring two problems :the pressure is too large, waste more salt : the pressure is too low and s is not enough to reach. renewable effects .
5. Because it is a solid bed softening, so the filling of the tank is 70% (jar increases, increasing the cost) to soften the effect is not very good.
6:It also need to install flow meters. (Additional cost).
7: External power supply, easy to damage.
8: If use more than one set, there are no interlock function,and does not support micro-manage t,he output easily damage body itself and other valve .
9: poor performance, high prices, poor quality, not perfect after-sales service.
ZR4双罐顶装浮动床软化阀
控制模式:全自动(时间/流量双模式、流量默认)。
适用压力:0.08—0.20Mpa。
产水量:3-5 t/h。
水质硬度:原水<8-15mmol/L,出水<0.03 mmol/L。
再生剂比耗:1:1.4或82g / mol。
软货残硬:不大于0.03 mmol/L。
运行流速:15-55m/h。
自用水率:<5%。(与原水硬度相关)
适用罐体:罐体直径250—350mm。
滤料装填量(升):交换罐容积的90-95%。
进出排吸盐水口:IN:DN25,OUT:DN25,Discharge:DN15,salt:10mmOD。
中心管:DN25(6分)。
基座:2.5inch-8un(2.5寸螺纹口径)。
功能特点; DR单罐软化阀为浮动床,省盐、省水、省树脂、高硬水软化。
流量/时间双控模式 两交换罐同时产水,交替再生,软水清洗。
进水压力低,具有停水、停电记忆功能。
阀芯采用平面陶瓷密封。
应用范围;
家用净水、软水系统
锅炉给水软化系统
反渗透预处理系统
泳池过滤设备
高硬水软化,纳离子除盐
生活水处理除盐,柒厂生产用水
去离子净化设备有组成
太阳光伏发电生产用水
品牌 洁源 型号 ZR4双罐顶装浮动床软化阀
材质 陶瓷 形态 旋转式
连接形式 螺纹 驱动方式 电子
流动方向 换向 公称通径 25
零部件及配件 盐阀/盐桶/单向阀 外形 微型
标准 国标 压力环境 低压
工作温度 常温 类型(通道位置) 三通式
适用介质 弱酸碱介质
联系方式