张家港市同创机械有限公司
主营产品:
2023年09月05日 09:18
种类 |
中空吹塑机 |
螺杆直径 |
600(mm)mm(mm) |
螺杆长径比 |
25:1 |
外形尺寸 |
295*190*250(mm)mm(mm) |
产品别名 |
挤出机 |
产品用途 |
生产塑料容器制品 |
生产能力 |
60-75(kg/h)(kg/h) |
电动机功率 |
15(kw)(kw) |
模架数量 |
1 |
品牌/型号 |
同创 |
吹袋宽度 |
根据客户需要(mm) |
吹袋比例 |
10:1 |
技术参数 ParametersT0NGCHUANG
基本规格 Specifications TCY603系列 TCY603series
适应原料 Material PE、PP、PVC、PA….
制品容积 Max container capacity L 0.5-1.5
模头数 Number of die set 1、2、3、4
生产能力(空循环)Output(dry Cycle) pc/hr 300
机器外形尺寸(长×宽×高) Machine Dimension(L×W×H) M 3.5x2.2x2.8
机器重量 Total weigh ton 5.5
开合模系统 Clamping Unit TCY603系列 TCY603series
锁模力 Clamping force KN 70
模板间距 Platen opening stroke mm 188-538
模板尺寸 Platen size mm 338x450
模具尺寸(宽×高) Max mould size(W×H) mm 450x500
模具厚度 Mould thickness mm 190-300
动力 Power TCY603系列 TCY603series
驱动动率 Max drive KW 20.5
总功率 Total power KW 33.9
螺杆风机功率 Fan power for screw KW 0.3
气源压力 Air pressure Mpa 0.7
气源排量 Air consumption m³/min 0.6
平均能耗 Average energy consumption KW 12.5
挤出系统 Extruder unit TCY603系列 TCY603series
螺杆直径 Screw diameter mm 60
螺杆比径比 Screw L/D ratio L/D 25
塑化能力 Plasticising capacity Kg/hr 60
螺杆加热段数 Number of heating zone zone 3
螺杆加热功率 Extruder heating power KW 8.8
挤出电机功率 Extruder driving power KW 15
模头 Die TCY603系列 TCY603series
模头加热段数 Number of heating zone zone 3…5
模头加热功率 Power of die heating KW 4.6
挤出口直径 Max die-pin diameter mm 20--145
双模头中心距 Center distance of double die mm 150
叁模头中心距 Center distance of tetra-die mm 85
电器部分Electrical Equipment
触摸屏人机界面Touch screen man-machine interface HITEC/HTAIWAI
PLC MITSUBISHI/Japan
变频器Transducer MITSUBISHI/Japan
温控仪 Temperature controller OMRON/Japan
低压电器Low pressure electrical HITEC/YangMing
继电器Relay Schneider/France
按纽开关Button switch Schneider/France
电机Electricity machine SIEMENS/Germany
接触器Contactor Schneider/France
液压部分Hydraulic Pressure Part
油泵Oil pump YUKEN/Japan
液压阀件Hydraulic pressure valve YUKEN/Japan
液压软管Hydraulic pressure tube KIMBERLEV
密封件Airproof VALAVA/Japan
气动部分Air Drive Part
气动元件Air per component TAIWAI / AIRTAC
联系方式